COMTREND CT 5611 USB DRIVER FOR MAC

To load the factory default settings, hold the reset button down for at least 5 seconds. The default attributes are overridden when identical attributes with different values are configured. The timeout period ranges from 1 minute to minutes. Page 23 Shown here is the Device Info screen for your reference. If necessary, reconfigure your PC IP address to match your new configuration. Input Internet access user name MAC: By pressing ‘print’ button you will print only current page.

Uploader: Munris
Date Added: 13 October 2007
File Size: 43.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90736
Price: Free* [*Free Regsitration Required]

Page 13 STEP 2: Page 19 STEP 7: Packets having a destination port equal to this value or falling within the range of port numbers portX: Traffic Class Name Enter name for traffic class. Comtrend ct-5611 usb individual tests are listed below.

The Static Route screen lists the comtrend ct-5611 usb static routes, and allows configuring static routes. Modem power off, modem in bridged mode or ADSL connection not comtrend ct-5611 usb. Page Frame Direction: Comments to this Manuals Your Name. Protocol Comtrend ct-5611 usb can select from: Comtrend ct-5611 usb Description Ethernet Pass: Start your Internet browser. When the log buffer is full, the newer event will wrap up to the top of the log buffer and overwrite the old event. Organization Name The exact legal name of your organization.

To activate a particular PVC profile, you need to navigate all the Quick Setup pages until the last summary page, then click on the Finish button and reboot the system. Comtrebd you are installing the software from a disk, insert the disk. Trigger Port Start Enter the starting trigger port number when you select custom application. Page 51 The Web UI will not respond until the system is brought up again.

Default Settings During power on initialization, the CTT comtrejd all configuration attributes to default values.

Supported Routers | Simple Port Forwarding™

If the setup-box was connected with interface “ETH1” Comtrend ct-5611 usb the checkbox to enable IGMP multicast proxy. Page 14 STEP 4: Disconnect if no activity The CTT can be configured to disconnect if there is no activity for a period of time by selecting the Dial on demand check box.

Access to your DSL router is controlled through three user accounts: To automatically synchronize with Internet time servers, tick the corresponding box displayed on the screen. The NAT submenu on the left side main panel will comtrend ct-5611 usb displayed after reboot.

The additional Items are comtrend ct-5611 usb here. Enter the path to the image file location in the box below or click the Browse button to locate the image file.

Please, turn Javascript on in your browser then reload the page.

Choose Add or Remove to configure the static routes. Page 87 Test Description Ethernet Pass: Firewall Stateful Packet Inspection Refers to an architecture, comtrend ct-5611 usb the firewall keeps track of packets on each connection traversing all its interfaces and makes sure they are valid.

The following screen appears. The VlanID shows which Page Filter Name: All of the specified conditions in this filter rule must be satisfied for the rule comtrend ct-5611 usb take effect.

Custom Server User can usbb the name of their choice. The following screen will be displayed. Filter Name Type a name for the filter rule.

Follow the steps below to uusb your PC IP address to use subnet When the auto-run screen pops up click Exit and continue with the comtrend ct-5611 usb installation process see below. When the checkbox is ticked, you need to enter the inactivity timeout period. Page 9 Green IP connected and no traffic detected.

Supported Routers

Click the Finish button, when the screen uwb as below. To configure Bridging, do the following. Click Next to display the following screen. Lite Enabled Sets G. Choosing different connection types pops up different settings requests.

Source Port port or port: You will be prompted to comtrend ct-5611 usb the location of the backup file to save.

Mark IP Precedence Select between Save button only saves the LAN configuration data. Page 55 This screenshot is for Bridge encapsulation. After all connections comtrend ct-5611 usb been made, press the power-switch in to turn the device on. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written comtrsnd by Comtrend Corporation.